CRM Mitchell1 2020-08-12T22:00:30+00:002016 Lexus NX 200t CRM Mitchell1 2020-08-12T22:00:30+00:00
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- Complete Vehicle Checkover
- DRIVER'S FLOOR MAT – CHECK – [Only use the driver's floor mat designed specifically for the model and model year of your vehicle, such as Lexus Genuine floor mats. Always properly secure the driver's floor mat using the retaining hooks. Never install another floor mat on top of the existing driver's floor mat. Never install the driver's floor mat upside down.] AXLE SHAFT BOOTS – INSPECT – [Inspect axle boots and clamps for cracks, deterioration and damage. Replace any deteriorated or damaged parts and, if necessary, repack the grease.] BALL JOINT and DUST COVERS – INSPECT – [Check the suspension and steering linkage ball joins for looseness and damage. Check all dust covers for deterioration and damage. Replace any deteriorated or damaged parts.] BODY COMPONENTS – INSPECT – [Visually inspect for corrosion, scratches and other damage. Check outer body panels, inner panels of the hood and doors, and underneath the vehicle. Apply touch-up paint to any chips and scratches or have them repaired.] BRAKE HOSES – INSPECT – [Visually inspect for proper installation. Check for chafing, cracks, deterioration and signs of leaking. Replace any deteriorated or damaged parts.] BRAKE LINE PIPES – INSPECT – [Visually inspect for proper installation. Check for chafing, cracks, deterioration and signs of leaking. Replace any deteriorated or damaged parts.] BRAKE PADS, CALIPERS and ROTORS – INSPECT ENGINE COOLING SYSTEM HOSES and CLAMPS – INSPECT EXHAUST PIPES and MOUNTS – INSPECT – [Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary.] FLUID LEVELS – INSPECT – [Add if necessary.] RACK AND PINION ASSEMBLY – INSPECT STEERING GEAR/RACK – INSPECT – [Check for damage/leaks.] STEERING LINKAGE and BOOTS – INSPECT – [With the vehicle stopped, check for excessive freeplay in the steering wheel. Inspect the linkage for bending and damage and the dust boots for deterioration, cracks and damage. Replace any damaged parts.] WIPER BLADES – INSPECT BATTERY – REPLACE ENGINE OIL and FILTER – REPLACE – [If 0W-20 oil was not used at last oil change, or if you drive primarily under certain special operating conditions, you should also replace the engine oil with 0W-20 oil and replace the oil filter.] MAINTENANCE MINDER LIGHT – RESET VEHICLE – ROAD-TEST TIRES – ROTATE – [Applies to models with the same size front and rear tires and wheels.]
- Rotate tires
- PERFORM 4 WHEEL ALIGNMENT SET CAMBER/CASTER/ TOE ON ALL FOUR WHEELS. SET STEERING WHEEL
alexander s. gave our service a 5 star review on 8/10/2020